| | Results of the tests |
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|
| Check
the oepration of the light check device. If the side lights or number
plate lights do not work, the light failure warning light comes
on. |
Continue to Step
1
| The fault is not indicated
by the light failure warning light. |
See table
I30
|
| 1 | CHECK INDIVIDUAL LIGHTS | All OK | Problems met | Operation |
|---|
| Check
the condition of the individual bulbs and the bulb holder assembly |
Continue to Step
2
| Bulbs damaged | Replace bulbs |
| Rear lights cluster faulty |
Repair or replace the rear lights cluster
Op. 5540A80 |
| Front lights cluster faulty |
Repair or replace front lights cluster
Op. 5540B26 |
| No. plate lights faulty |
Renew or replace the no. plate lights
Op. 5540A94 |
| 2 | SIDE LIGHTS ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation |
|---|
| - connections between the ignition
switch and the stalk unit
- the connection between the stalk unt and the rev counter
- connections between the rev counter and bulbs
- bulbs earth
(
See E2010 SIDE LIGHTS / NO. PLATE LIGHTS
).
|
Continue to Step
3
| Connections broken | Restore the connections
( |
| 3 | STEERING COLUMN SWITCH UNIT CHECK | All OK | Problems met | Operation |
|---|
|
Check
the stalk unit is working properly: in particular, check the side
light switch
see DESCRIPTION AND OPERATION: 5550A stalk unit |
Continue to Step
4
| Stalk unit not working
properly |
Replace
the steering column switch unit
Op. 5550A12 |
| 4 | CHECK IGNITION SWITCH | All OK | Problems met | Operation |
|---|
| Check
that the side lights come on when the ignition key is turned in
the opposite direction |
Continue to Step
5
| Ignition switch faulty |
Renew or replace the ignition
switch
Op. 5520A10 |
| 5 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check
that the fault is no longer present | End of diagnosis | Fault persists | Search for the
fault starting from another symptom' |