3233057 - I16 CENTRE BRAKE LIGHT ("THIRD BRAKE LIGHT") NOT WORKING
When the brake pedal is pressed, with the ignition on, the central stop light ("third stop light") does not work.| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation | 
|---|---|---|---|---|
| Check the operation of the side stop lights | Continue to Step 1 | The side stop lights are not working | See table I15 | |
| 1 | CHECK INDIVIDUAL LIGHTS | All OK | Problems met | Operation | 
| Check the condition of the individual ten bulbs and complete bulb holder assembly | Continue to Step 2 | Bulbs damaged | Replace bulbs | |
| Bulb holder faulty | Repair or replace the third stop light Op. 5050D17 | |||
| 2 | CHECK STOP LIGHTS ELECTRICAL CIRCUIT | All OK | Problems met | Operation | 
| Check, in order: 
 | Continue to Step 3 | Component defective | Replace the component involved (if a fuse is involved, search for the cause of the problem) | |
| Connections broken | Restore the connections ( | |||
| 3 | BRAKE PEDAL SWITCH CHECK | All OK | Problems met | Operation | 
| Check that the brake pedal switch is fitted correctly and working ( See E2021 BRAKE LIGHTS ). | Continue to Step 4 | Brake pedal switch faulty | Repair or replace the brake pedal switch Op. 5550D10 | |
| 4 | CHECK CORRECT OPERATION | All OK | Problems met | Operation | 
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |