3238218 - 4450A40 rear wheel geometry - check using optical equipment

the car must be in 'STANDARD A' conditions, i.e. vehicle unladen; this is the total vehicle weight, including spare wheel, tools, accessories, fluids and full fuel tank.

Check the rear wheel geometry is within specified limits with the vehicle unladen and the tanks and reservoirs filled.

	Measurement		Value
-	Standard A (mm)	Class A	45.9 +/- 7

Check the rear wheel geometry, for vehicles with sports packs, is within specified limits with the vehicle unladen and the tanks and reservoirs filled.

	Measurement		Value
-	With sports kit, Standard A (mm)	Class A	23.6 +/- 7

The rear wheel toe in figures, with the vehicle unladen and all tanks and reservoirs filled, are given in the table.

	Measurement		Value
-	D2 - D1 (mm)		3.27 +/- 1
	(Unladen vehicle filled with fluids) (-)	-

The rear wheel toe in figures, for vehicles with sports packs, with the vehicle unladen and all tanks and reservoirs filled, are given in the table.

	Measurement		Value
-	D2 - D1 (mm)	With sports kit	3.22 +/- 1
	(Unladen vehicle filled with fluids) (-)	-

1. To adjust the rear wheel toe in, use the cam bolts (1a) fixing the rear track control arms (1b) to the rear suspension crossmember (1c). The rear wheel camber angles, which cannot be adjusted, with the vehicle unladen and all tanks and reservoirs filled, are given in the table.

	Measurement		Value
-	Standard A ()	Class A	0°48' -40'

The rear wheel camber angles, which cannot be adjusted, for vehicles with sports packs, with the vehicle unladen and all tanks and reservoirs filled, are given in the table.

	Measurement		Value
-	With sports kit, Standard A ()	Class A	1°15' -40'

the car must be in 'STANDARD A' conditions, i.e. vehicle unladen; this is the total vehicle weight, including spare wheel, tools, accessories, fluids and full fuel tank.

Check the rear wheel geometry is within specified limits with the vehicle unladen and the tanks and reservoirs filled.

	Measurement		Value
-	Standard A (mm)	Class A	26 +/- 7

The rear wheel toe in figures, with the vehicle unladen and all tanks and reservoirs filled, are given in the table.

	Measurement		Value
-	D2 - D1 (mm)		3.0 ± 1
	(Unladen vehicle filled with fluids) (-)	-

1. To adjust the rear wheel toe in, use the cam bolts (1a) fixing the rear track control arms (1b) to the rear suspension crossmember (1c). The rear wheel camber angles, which cannot be adjusted, with the vehicle unladen and all tanks and reservoirs filled, are given in the table.

	Measurement		Value
-	Unladen vehicle filled with fluids) ()	Class A	1° 16' +/-20'