3238743 - 7025B58 boot lid lock striker - r+r

Removing ( Refitting )  - 7040B22  luggage compartment/load platform moulding - r+r1. Disconnect the driving cable.2. Unscrew the screws.3. Remove the lock striker. Refitting ( Removing ) Check up the striker so as to verify it is not damaged.1. Position the striker.2. Screw the clamping screws, without tightening them.3. Reconnect the driving cable.4. As necessary, in order to obtain a good sliding block slipping, (4a), lubricate them only on their slipping pin (4b).5. Move the striker in the right position using the screw slotted holes.Arrows show the permitted movements for the adjustment.6. Adjust the driving cable using the anchor slots which are on the sheath end. Tighten the clamping screws.Check the right coupling of striker and boot lid lock and the alignment with closed lid. - 7040B22  luggage compartment/load platform moulding - r+r