3238976 - 7065B14 Rear seat belt ANCHORAGE ROD , (one), left or right - R.R.

Removing ( Refitting )  - 7050A20  one-piece rear seat cushion - r r1. Unscrew anchorage link screw.2. Remove anchorage link. Refitting ( Removing ) Check tie rod is not damaged.

If safety belt has been subjected to a strong stress for example, it has to be replaced completely together with anchorage and its fixing screws. In fact, although it doesn't seem to have visible defects, it could have losen its resistance characteristics.

Reassembly anchorage link.Tighten screw to the prescribed couple.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SEAT BELT BRANCH WITH ATTACHMENT BUCKLE...	-	3.6 - 4.4

 - 7050A20  one-piece rear seat cushion - r r