1080B60 LAMBDA SENSOR - R.R. - Alfa - 156 - eLearn

3237584 - 1080B60 LAMBDA SENSOR - R.R.

) Position the vehicle on the ramp.Disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the Lambda sensor and release the electrical wiring from its attachments.

	Name	Connector
1	Lambda sensor	K40

1. Disconnect the electrical connection for the Lambda sensor and release the electrical wiring from its attachments.

	Name	Connector
1	Lambda sensor	K40

- 7055B54 under-engine guard - r r1. Remove the Lambda sensor protection.

1. Unscrew the Lambda probe from the exhaust pipe and remove together with its wiring.

Refitting ( Removing

) Fit the Lambda sensor complete with electrical wiring on the exhaust pipe and tighten it to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	-	LAMBDA PROBE	M18	4.0 ÷ 5.0

Fit the Lambda sensor protection.Secure the lambda probe wiring using the collars. - 7055B54 under-engine guard - r rConnect the electrical connection for the Lambda sensor and secure.Connect the battery terminal (-).Remove the car from the ramp.