3237593 - 1080D14 pipe from engine oil vapour separator to intake - r + r

Removing ( Refitting ) 1. Disconnect the pipes (1a) from the integrated butterfly casing and the pipe (1b) from the corrugated hose.2. Undo the bolt for the oil vapour duct and remove it from the cylinder head complete with pipes.  - 1016A40  ignition coil cover on cylinder head- r+r1. Disconnect the oil vapour inlet pipes from the tappet cover.2. Disconnect the oil vapour inlet pipes from the integrated butterfly casing and from the corrugated hose, then remove them. Refitting ( Removing ) Fit the oil vapour inlet pipes and fix them using the bands. - 1016A40  ignition coil cover on cylinder head- r+r Fit the duct connector complete with pipes.Connect the oil vapour inlet pipes to the corrugated hose and to the integrated butterfly casing.Fix the duct connector using the bolt.