3237651 - 1016A20 single cam cover - r + r and replace gasket

Removing ( Refitting ) Disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	A1

 - 1016A40  ignition coil cover on cylinder head- r+r - 5510C14  ignition coil/s - r+rRelease the electrical wiring from the bands on the tappet cover. 1. Undo the bolt (1a) and disconnect the oil vapour recirculation pipe duct (1b) from the tapper cover.2. Undo the bolts (2a) and remove the rocker cover (2b) complete with gasket. 1. Disconnect the oil vapour recirculation pipes from the tappet cover.2. Undo the bolts (2a) and remove the rocker cover (2b) complete with gasket. Refitting ( Removing ) Fit the tappet cover, complete with a new seal, and fix it tightening the bolts to the recommended torque.Connect the oil vapour recirculation pipe duct to the tappet cover and fix it using the bolt. Fit the tappet cover, complete with a new seal, and fix it tightening the bolts to the recommended torque.Connect the oil vapour recirculation pipes to the tappet cover. Fix the electrical wiring to the bands on the tappet cover. - 5510C14  ignition coil/s - r+r - 1016A40  ignition coil cover on cylinder head- r+rConnect the negative (-) battery terminal.