5510C34 RPM AND TIMING SENSOR (SINGLE) - R+R - Alfa - 156 - eLearn

3238402 - 5510C34 rpm and timing sensor (single) - r+r

) Place the car on a ramp. 1. Disconnect the electrical connection for the rpm and timing sensor.

	Name	Connector
1	Rpm sensor	K46

Disconnect the electrical connection for the rpm and timing sensor on the side part of the air intake casing (VIS device), timing side.

	Name	Connector
-	Rpm sensor	K46

Raise the car. - 7055B54 under-engine guard - r r1. Undo the bolts and remove the rpm and timing sensor together with its wiring.

Refitting ( Removing

) Fit the rpm and timing sensor together with its wiring to the crankcase and tighten the retaining bolt. - 7055B54 under-engine guard - r rLower the vehicle. Connect the electrical connection for the rpm and timing sensor to the connector located on the side of the air intake casing (VIS device), timing side.

	Name	Connector
-	Rpm sensor	K46

Connect the electrical connection for the rpm and timing sensor to the connector fastened to the air intake casing from the timing side.

	Name	Connector
-	Rpm sensor	K46