1084A16 OIL DIP STICK PIPE - R R - Alfa - 156 - eLearn

3237609 - 1084A16 oil dip stick pipe - r r

) Position the vehicle on the ramp. Proceed with the removal - 7055B54 under-engine guard - r r . 1. Undo the bolt fixing the exhaust manifold to the mounting bracket on the crankcase.

1. Undo nuts (1a) and (1b) securing the exhaust manifold to the front exhaust pipe section.

1. Undo the nuts (1a) and remove the exhaust manifold heat shield (1b).

Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r . 1. Undo the nuts (1a) securing the exhaust manifold (1b) to the cylinder head amd move aside as necessary.

1. Withdraw the oil level dipstick.2. Undo the nut (2a) and remove the engine oil dipstick pipe (2b).

Refitting ( Removing

) Place the complete engine oil dipstick tube back in its housing and fix it using the bolt.Place the engine oil dipstick back in its seating.Place the exhaust manifold back in its housing and fix it tightening the cylinder head nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST MANIFOLD/S	M8	(Cylinder head side) 1.7 ÷ 2.1

Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r . Place the exhaust manifold heat shield back in its housing and fix it using the nuts.Tighten the nuts securing the exhaust manifold to the front exhaust pipe section to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST MANIFOLD/S	M8	(Front. section of exhaust pipe side) 2.3 ÷ 2.8

	Fastening	Component	Ø	Value(daNm)
-	Bolt	EXHAUST MANIFOLD/S	M8	(Front. section of exhaust pipe side) 2.3 ÷ 2.8

Tighten the bolt fixing the exhaust manifold to the mounting bracket on the crankcase. Proceed with the refitting - 7055B54 under-engine guard - r r . Remove the car from the ramp.