3237449 - 1008B10 power unit front mount (timing side) flexible block - replace

Removing ( Refitting ) Position the vehicle on the ramp. - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r rPosition a hydraulic jack under the engine.1. Undo the bolts (1a) and (1b) and remove the flexible mounting for the power unit front support (1c). Refitting ( Removing ) Fit the flexible mounting for the power unit front support and fix it to the bodyshell tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT RUBBER MOUNTS	M6	2.7 - 3.4

Tighten the bolt fixing the timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE MOUNT TIMING SIDE	M12	7.5 - 9.2

Remove the hydraulic jack from under the engine. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r r - 4450B10  Front WHEEL (one) - R.R.Remove the vehicle from the ramp.