3237518 - 1040A70 submerged pump assembly complete with level guage control - r + r

When scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.

When scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.

For cars fitted with returnless system, when scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.
Removing ( Refitting ) Working via the luggage compartment, undo the bolts (1a) for the luggage retaining hooks and remove the cover (1b).
 - 7050B18  rear seat arm rest - r+r1. Undo the nuts (1a) and remove the access cover (1b) to the immersed pump assembly complete with gauge.
1. Disconnect the electrical connection from the immersed pump assembly complete with gauge.

NameConnector
1Fuel pump and sender unit  N40 
2. Disconnect the fuel supply (2a) and return pipes (2b) from the immersed pump assembly complete with gauge.
Suitably secure the pipes so that they do not slide inside the opening made in the bodyshell.
1. Disconnect the electrical connection from the immersed pump assembly complete with gauge.

NameConnector
1Fuel pump and sender unit  N40 
2. Disconnect the fuel supply pipe from the immersed pump assembly complete with gauge.
1. Undo the ring nut (1a) fixing the immersed pump assembly complete with gauge using the tool (1b).

NameCountry
1bKey1.822.135.000
2. Remove the immersed pump assembly complete with gauge.
Refitting ( Removing ) Fit the immersed pump assembly complete with gauge.1. Tighten the ring nut (1a) fixing the immersed pump assembly complete with gauge using the tool (1b).

NameCountry
1bKey1.822.135.000
Connect the fuel supply and return pipes to the immersed pump assembly complete with gauge.Connect the electrical connection to the immersed pump assembly complete with gauge. Connect the fuel supply pipe to the immersed pump assembly complete with gauge.Connect the electrical connection to the immersed pump assembly complete with gauge. Fit the access cover to the immsersed pump assembly complete with gauge and fix it using the nuts. - 7050B18  rear seat arm rest - r+rPlace the luggage compartment cover back in its housing and fix the luggage retaining hooks using the bolts.

When scrapping the submerged pump assembly with level gauge mechanism, always empty of fuel as follows:

  • while removing the submerged pump assembly, draw off any fuel in the tank using an in-line pump (electric or manual);
  • fully remove the submerged pump assembly then, working at the bench, connect an in-line pump (electric or manual) to the assembly connector;
  • run the pump for as long enough to collect most of the petrol present inside the filter.