3237521 - 1040B32 front fuel delivery line - r r

Removing ( Refitting ) Place the car on a ramp. - 1016A40  ignition coil cover on cylinder head- r+r

Before any interventions on components of the fuel system, discharge the pressure in the system using tool N. 1.870.684.000 connected to the specific valve located on the fuel distribution manifold.

1. Disconnect the fuel supply pipe from the fuel manifold and release it from the retaining bands. Raise the vehicle. 1. Remove the plastic protections for the fuel supply and return pipes and for the anti-evaporation system pipe from the lower part of the vehicle.2. Release the fuel supply pipe from the retaining bands. 1. Disconnect the rapid connector for the two sections of the fuel supply pipe, then remove the front section of the actual pipe. Refitting ( Removing ) Connect the rapid connector for the front section with the rear section of the fuel supply pipe.Secure the front section of the fuel supply pipe using the retaining bands on the underbody.Fit the plastic protections for the fuel supply pipe and the anti-evaporation system pipe.Lower the vehicle and pass the pipe inside the engine compartment and secure it using the retaining brackets.Connect the front section of the fuel supply pipe to the manifold. - 1016A40  ignition coil cover on cylinder head- r+r