3237627 - 1088C12 water pump - r+r for versions with air conditioner

Removing ( Refitting ) Place the car on the lifting bridge.Disconnect battery negative pole.

NameConnector
-Battery  A1B 
 - 7055B54  under-engine guard - r r - 1016A40  ignition coil cover on cylinder head- r+r - 5510C14  ignition coil/s - r+r - 1016A20  single cam cover - r + r and replace gasket- 4450B80 cap of one wheel - r+r  - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 1092G10  single engine belt r r - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092A10  Crankshaft services PULLEY - R.R. - 1032D12  timing system protective cover(s) - r + r  - 1092E10  counter-rotating shaft drive toothed belt - r + r  - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1088D24  rigid pipe for coolant inlet to water pump - r + r 2. Unscrew screws (2a) and remove timing belt (2b) L-H side protection.
1. Unscrew screws (1a) of intake side camshaft pulley by using tool as countertorque.

NameCountry
-Counter-torque1.822.155.000
2. Remove intake side camshaft pulley.
Unscrew screws (1a) and remove water pump (1b) complete with O-Ring.
Refitting ( Removing ) Fit water pump complete with a new O-Ring and fix it with its screws to torque.

FasteningComponentØValue(daNm)
-BoltORDINARY PREPARATIONM61.7 - 2.1
Fit intake side camshaft pulley and fix it with its screws without tightening them.Fit timing belt L-H side protection and fix it with its screw.

FasteningComponentØValue(daNm)
-BoltBELT PROTECTION COVERM60.9
Unloose screw of exhaust side camshaft pulley by using tools as countertorque.

NameCountry
-Counter-torque1.822.146.000

NameCountry
-Counter-torque1.822.156.000
 - 1088D24  rigid pipe for coolant inlet to water pump - r + r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner  - 1092E10  counter-rotating shaft drive toothed belt - r + r  - 5510C14  ignition coil/s - r+r - 1016A20  single cam cover - r + r and replace gasket- 4450B80 cap of one wheel - r+r  - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 1092G10  single engine belt r r - 1092G20  engine component single belt fixed tensioner - one - r + r - 1032D12  timing system protective cover(s) - r + r - 1092A10  Crankshaft services PULLEY - R.R. - 1016A40  ignition coil cover on cylinder head- r+rFit engine compartment lower shield.