3237649 - 1008C18 link mount on engine - r r

Removing ( Refitting ) Position the vehicle on the ramp.Disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	A1

 - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r r - 1076B50  exhaust pipe attachment to engine - r + r - 1016A40  ignition coil cover on cylinder head- r+r - 5510C14  ignition coil/s - r+r - 1016A20  single cam cover - r + r and replace gasket - 1092G10  single engine belt r r - 1092G14  engine component single belt mobile tensioner - r + r - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1032D12  timing system protective cover(s) - r + r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1032C18  mobile timing system tensioner - r + r for 24 valve engines1. Undo the bolt (1a) and remove the timing belt fixed tensioner (1b). 1. Disconnect the electrical connections from the alternator.

	Name	Connector
1	Alternator	A10

2. Undo the bolts (2a) and move the alternator (2b) aside.  - 1008C10  power unit upper reaction link r r Undo the bolts and remove the timing belt right side protection. 1. Undo the bolts (1a) for the power assisted steering pump drive pulley using a suitable spanner (1b) for counter-torque.2. Remove the power assisted steering pump drive pulley.3. Undo the bolts (3a) and move the power assisted steering pump (3b) aside without disconnecting the pipes. 1. Undo the bolts (1a) and remove the support on the enigne for the reaction rod and the various engine components (1b). Refitting ( Removing ) Fit the support on the engine for the reaction rod and the various engine components and fix it tightnening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE LINK AND VARIOUS COMPT.MOUNTS	M8	2.5

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE LINK AND VARIOUS COMPT.MOUNTS	M10	5

Place the power assisted steering pump back in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER STEERING PUMP	M8	1.9 - 2.3

Fit the power assisted steering pump drive pulley and fix it tightening the bolts to the recommended torque using a suitable spanner for counter-torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER STEERING PUMP DRIVE PULLEY	M8	1.9 - 2.3

Fit the right side protection for the timing belt and fix it using the bolts.  - 1008C10  power unit upper reaction link r rPlace the alternator back in its housing and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ALTERNATOR ASSEMBLY	M10	7.0

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ALTERNATOR ASSEMBLY	M12	9.0

Connect the electrical connections to the alternator.Fit the timing belt fixed tensioner and fix it using the bolt. - 1032C18  mobile timing system tensioner - r + r for 24 valve engines - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1032D12  timing system protective cover(s) - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092G14  engine component single belt mobile tensioner - r + r - 1092G10  single engine belt r r - 1016A20  single cam cover - r + r and replace gasket - 5510C14  ignition coil/s - r+r - 1016A40  ignition coil cover on cylinder head- r+r - 1076B50  exhaust pipe attachment to engine - r + r - 7055B54  under-engine guard - r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R.Remove the vehicle from the ramp.