3238609 - 7005E50 front side door pillar trim (one) lh or rh - r r
Removing
(
Refitting
)
- 7005C44 interior handle panel
- r r - 7005E38 front side door interior handle-r r - 7005E12 corner cover of one front side door, lh or rh r r - 7005E22 l/h or r/h front door panel radio grille (one) -
r+r - 5570T90 front speaker - r r - 7005E11 lh or rh front door inner panel - r+r with fouling
parts removed - 7005A04 front side door water guard protection - r r or replace
with door panel removed - 7005D30 front side descending window glass scraper (inner)
r r - 7005D24 front door window rear guide - r r - 7005D15 front side door descending window glass r r - 7005R30 electrically controlled door mirror (one) - r+r - 7005D26 front side descending window glass scraper (outer)
r r - 7005D18 front side door descending window glass channel r
r
Refitting
(
Removing
)
Use a new lining.Thoroughly clean any adhesive residues
from the fitting area using heptane.Bathe the fitting area in soapy water.1. Remove the protection from the adhesive side of the lining, then
place it in position.The soapy water facilitates the sliding needed for the correct
positioning.2. Using a sponge, press on the lining to remove any air bubbles.