3239127 - 1056BG Check on operation of engine coolant temperature sensor
Make sure that the ignition is OFF (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ). Disconnect the electrical connection from the engine coolant temperature sensor. | Name | Connector |
|---|---|---|
| - | Engine temperature sender unit | K36 |
 | A 'dual NTC' post-modification engine coolant temperature sensor has been adopted.The nominal resistance is measured between pins B1 and B2. |
 | Measurement | Value | |
|---|---|---|---|
| - | Winding resistance (ohm) | at +20°C | 860 +/- 10 |
