3237444 - 1008A42 gear box left rigid mount - r r

Removing ( Refitting ) Place the car on a hoist.Raise the car. - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r rPlace a hydraulic jack under the engine.1. Unscrew screw (1a) and screw (1b) then remove the gearbox left rigid mount(1c). Refitting ( Removing ) Assemble the gearbox left rigid mount and fasten it to the gearbox tightening the screws to correct torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	4.2 ÷ 5.1

Tighten to torque the screw fastening the gearbox left rigid mount to its flexible block.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	4.2 ÷ 5.1

Remove the hydraulic jack from under the engine. - 7055B54  under-engine guard - r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R.Remove the car from the hoist.