3237446 - 1008A44 rear rigid mount - r r

Removing ( Refitting ) Position the vehicle on the ramp. - 7055B54  under-engine guard - r r - 1076A32  exhaust rigid mount - r r - 1076B50  exhaust pipe attachment to engine - r + rPosition a hydraulic jack under the engine.1. Undo the nut (1a) and the bolt (1b) and remove the rod (1c). 1. Undo the bolts (1a) and remove the power unit rigid rear support (1b). Refitting ( Removing ) Fit the rigid rear support for the power unit and fix it to the gearbox tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT RIGID REAR MOUNT	M12	7.5 ÷ 9.2

Tighten the bolt fixing the power unit rigid rear support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT RIGID REAR MOUNT	M12	7.5 ÷ 9.2

Fit the rod and fix it tightening the bolt and the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD....	M12	7.2 ÷ 9.2

	Fastening	Component	Ø	Value(daNm)
-	Nut	POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD....	M12	2.7 ÷ 3.4

Remove the hydraulic jack from under the engine. - 1076B50  exhaust pipe attachment to engine - r + r - 1076A32  exhaust rigid mount - r r - 7055B54  under-engine guard - r rRemove the car from the ramp.