3237474 - 1020D18 front crank shaft cover oil seal - replace

Removing ( Refitting ) Position the vehicle on the ramp. - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r rUndo the engine oil drain plug and drain the oil.

Collect the engine oil in a suitable container.

 - 1016A40  ignition coil cover on cylinder head- r+r - 5510C14  ignition coil/s - r+r - 1016A20  single cam cover - r + r and replace gasket - 1092G10  single engine belt r r - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1032D12  timing system protective cover(s) - r + r  - 1092E10  counter-rotating shaft drive toothed belt - r + r - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed  - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1032B47  toothed drive pulley - r r for versions with air conditionerRelease the crankshaft front cover oil seal using a screwdriver and remove it. Refitting ( Removing ) 1. Fit a new crankshaft front cover oil seal (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.821.247.000

 - 1032B47  toothed drive pulley - r r for versions with air conditioner - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner  - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed - 1092E10  counter-rotating shaft drive toothed belt - r + r  - 1032D12  timing system protective cover(s) - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092G10  single engine belt r r - 1016A20  single cam cover - r + r and replace gasket - 5510C14  ignition coil/s - r+r - 1016A40  ignition coil cover on cylinder head- r+rTighten the engine oil drain plug to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Plug	ENGINE OIL DRAIN PLUG	M18	1.7 - 2.1

 - 7055B54  under-engine guard - r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R.Refill the engine lubrication circuit using the recommended oil.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA 20K	4.4

If the vehicle is subject to particulary sporty usage, use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA RACING	4.4

For the optimum operation of the engine in particularly harsh climatic conditions (temperatures below -20 degrees C), use the recommended oil for the engine lubrication circuit.

	Type	Component	Name	Qty.
-	Oli [l]	ENGINE LUBRICATION CIRCUIT	SELENIA PERFORMER	4.4

Remove the car from the ramps.