3237596 - 1080E10 tank fuel vapour separator - r + r

Removing ( Refitting ) Place the car on the lifting bridge.Disconnect battery negative pole.

	Name	Connector
-	Battery	A1

1. Unscrew fixing screws (1a) and move fuel vapour tank (1b) away from its seating. 1. Remove clamp (1a) and disconnect pipe (1b) from anti-tilting valve. 1. Unscrew nuts (1a) and screws (1b), then remove plastic guard of fuel inlet pipe. 1. Disconnect the two anti-evaporation system pipes (1a) from rapid clutches (1b), then remove fuel vapour separator. Refitting ( Removing ) Refit fuel vapour separator in its seating, then connect rapid clutches of anti-evaporation system pipes again.Refit plastic guard of fuel inlet pipe.Connect anti-tilting valve to its pipe and fix it with a new clamp.Fix oil vapour separator to its bracket.Connect battery negative pole.