1020E10 OIL SEAL COVER (ONE) - L OR R - ON COUNTER-ROTATING SHAFTS - R + R AND REPLACE SEALS - Alfa - 156 - eLearn

3237658 - 1020E10 oil seal cover (one) - l or r - on counter-rotating shafts - r + r and replace seals

) Place the car on the lifting bridge. - 4450B10 Front WHEEL (one) - R.R. - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54 under-engine guard - r r - 1016A40 ignition coil cover on cylinder head- r+r - 5510C14 ignition coil/s - r+r - 1016A20 single cam cover - r + r and replace gasket - 1092G10 single engine belt r r - 1092G20 engine component single belt fixed tensioner - one - r + r - 1092A12 crankshaft pulley - r+r for versions with air conditioner - 1032D12 timing system protective cover(s) - r + r - 1092E10 counter-rotating shaft drive toothed belt - r + r - 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1092E24 counter-rotating shaft pulley - r + r with toothed belt removedAs to L-H oil seal cover - intake side act as follows:1. Unscrew screws (1a) and displace power steering fluid reservoir (1b).2. Unscrew screws (2a) and remove R-H side protection of timing belt (2b).

1. Unscrew screws (1a) and remove oil seal cover (1b) complete with oil seal.Extract oil seal from seal cover.

As to L-H oil seal cover- exhaust side act as follows: - 1032C32 fixed timing system tensioner (one) r + r1. Unscrew screws (1a) and remove oil seal cover (1b) complete with oil seal and timing mobile tensioner (1c).Extract oil seal from seal cover.

Refitting ( Removing

) As to L-H oil seal cover - exhaust side act as follows:1. Fit a new oil seal (1a) on oil seal cover by using tool (1b).

	Name	Country
1b	Fitting tool	1.821.247.000

Fit oil seal cover complete with oil seal and timing mobile tensioner and fix it with its screws to the prescribed torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COUNTER ROTATING SHAFT FRONT COVER	M6	0.6 - 0.7

As to L-H — oil seal cover - intake side act as follows:1. Fit a new oil seal (1a) on oil seal cover by using tool (1b).

	Name	Country
1b	Fitting tool	1.821.247.000

FIt oil seal cover complete with oil seal and fix it with its screws to the prescribed torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COUNTER ROTATING SHAFT FRONT COVER	M6	0.6 - 0.7

Fit timing belt side protection and fix it with its screws.Place power steering fluid reservoir back in its seating and fix it with its screws. - 1092E24 counter-rotating shaft pulley - r + r with toothed belt removed - 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1092E10 counter-rotating shaft drive toothed belt - r + r - 1032D12 timing system protective cover(s) - r + r - 1092A12 crankshaft pulley - r+r for versions with air conditioner - 1092G20 engine component single belt fixed tensioner - one - r + r - 1092G10 single engine belt r r - 1016A20 single cam cover - r + r and replace gasket - 5510C14 ignition coil/s - r+r - 1016A40 ignition coil cover on cylinder head- r+r - 7055B54 under-engine guard - r r - 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10 Front WHEEL (one) - R.R.Take the car off the lifting bridge.