3237660 - 1020E20 front oil seal of one counter-rotating shaft, l or r - r + r

Removing ( Refitting ) Place the car on the lifting bridge. - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 7055B54  under-engine guard - r r - 1016A40  ignition coil cover on cylinder head- r+r - 5510C14  ignition coil/s - r+r - 1016A20  single cam cover - r + r and replace gasket - 1092G10  single engine belt r r - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1032D12  timing system protective cover(s) - r + r - 1092E10  counter-rotating shaft drive toothed belt - r + r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1092E24  counter-rotating shaft pulley - r + r with toothed belt removedExtract oil seal from its counter-rotating shaft front cover. Refitting ( Removing ) 1. Fit a new oil seal (1a) on counter-rotating shaft front cover by using tool (1b).

NameCountry
1aFitting tool1.821.251.000
End by carrying out the following operations: - 1092E24  counter-rotating shaft pulley - r + r with toothed belt removed - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1092E10  counter-rotating shaft drive toothed belt - r + r - 1032D12  timing system protective cover(s) - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092G10  single engine belt r r - 1016A20  single cam cover - r + r and replace gasket - 5510C14  ignition coil/s - r+r - 1016A40  ignition coil cover on cylinder head- r+r - 7055B54  under-engine guard - r r - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R.Take the car off the lifting bridge.