3238021 - 2710A30 intermediate drive shaft - r + r with r/h drive shaft removed

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

 - 7055B54  under-engine guard - r r .  - 1076B50  exhaust pipe attachment to engine - r + r . 1. Undo the bolts (1a) and remove the intermediate drive shaft (1b) by withdrawing from its seat. Refitting ( Removing ) Place the intermediate driveshaft back in its housing by pushing through the mount.

Take care not to damage the grooved coupling on the differential during assembly.

Tighten the bolts fixing the intermediate driveshaft to the support to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	INTERMEDIATE DRIVE SHAFT	M8	(Support side) 2.5 ÷ 2.8

 - 1076B50  exhaust pipe attachment to engine - r + r .  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminalRemove the car from the ramps.