3238294 - 5020B80 heater system wiring bundle - r r or replace

For precise identification of the electrical connections, see Wiring Diagrams Section.

Removing ( Refitting )  - 7040G24  switch for facia compartment light - r+r - 7040G20  facia compartment light bulb holder - r+r - 7040A31  flap assembly - r r - 7040A14  flap of glove compartment trim element (one) - arrange - 5040D22  control (one) of air conditioner control support - arrange - 7065C42  ashtray (one) r+r - 5570T80  car radio unit - r+r - 2125C24  gear lever knob - r + r - 7040A60  under facia trim - r+r - 7040A65  passenger compartment box lock , one , r r (right and left).  - 3380A44  handbrake/linkage protection - r+r - 7040L28  tunnel switch panel - r r - 7040L20  tunnel trim - r r 1. Disconnect the facia wiring harness clips.2. Disconnect the electrical connections.3. Disconnect the retaining bands.4. Remove the heater case wiring harness. Refitting ( Removing ) Check that the wiring is undamaged and that the individual conductors are firmly attached to the connections.Check that the connections are fitted with anti-slip devices (secondary lock).If necessary, check the continuity.Refit the air conditioner case wiring harness.Connect the retaining clips.Connect the electrical connections.Connect the clips to the facia wiring harness.  - 7040L20  tunnel trim - r r - 7040L28  tunnel switch panel - r r - 3380A44  handbrake/linkage protection - r+r - 7040A65  passenger compartment box lock , one , r r - 7040A60  under facia trim - r+r - 2125C24  gear lever knob - r + r - 5570T80  car radio unit - r+r - 7065C42  ashtray (one) r+r - 5040D22  control (one) of air conditioner control support - arrange - 7040A14  flap of glove compartment trim element (one) - arrange - 7040A31  flap assembly - r r - 7040G20  facia compartment light bulb holder - r+r - 7040G24  switch for facia compartment light - r+r

For precise identification of the electrical connections, see Wiring Diagrams Section.