3239195 - Introduction - POWER UNIT SUPPORTS

The power unit mounting is of the "suspended" type.The unit is attached to the bodywork by means of two mountings (1) (aluminium) with rubber buffers (2); a third (steel), caliper type (3), attaches to the steering subframe. To limit jolting, the engine is connected to the bodywork at the top by means of a counterbrace (4).

CONSTRUCTION FEATURES

The power unit mounting is of the 'suspended' type.

The unit is fixed to the bodyshell by means of three supports with flexible damping mountings:

  • one in aluminium alloy on the timing side (1);
  • one in aluminium alloy on the gearbox side (2);
  • one swivelling type in steel (3), which is fastened to the front suspension crossmember.
To limit jolting, the engine is connected to the bodywork at the top by means of a counterbrace (4).