1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE - Alfa - 156 - eLearn

3237451 - 1008B30 gearbox side mount flexible block - replace

) Position the vehicle on the ramp. Proceed with removal - 4450B02 left front wheel r r . Proceed with removal - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with removal - 7055B54 under-engine guard - r r . Position a hydraulic jack under the engine.1. Undo the bolts (1a) and (1b), then remove the flexible mounting for the gearbox side support (1c).

Refitting ( Removing

) 1. Place the flexible mounting for the gearbox side support (1a) back in its housing and secure it by tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	GEARBOX SIDE RUBBER MOUNT	M8	(Bodyshell side) 3.2 ÷ 3.9

2. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

Remove the hydraulic jack from beneath the engine Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with refitting - 4450B02 left front wheel r r . Remove the car from the ramps.