1032D12 TIMING SYSTEM PROTECTIVE COVER(S) - R + R - Alfa - 156 - eLearn

3237498 - 1032D12 timing system protective cover(s) - r + r

1. Undo the bolts (1a) and remove the lower protective timing cover (1b).

Lower the vehicle.1. Undo the bolts (1a) and remove the upper timing gear cover (1b) complete with single drive belt (1c).2. Undo the bolts (2a) and remove the timing gear side guards (2b).

Fit the timing gear side guards and fix them using the bolts.Fit the upper timing gear cover complete with single drive belt and fix it using the bolts.Raise the car.Fit the lower protective timing cover and fix it using the bolts.

Removing ( Refitting

) Position the vehicle on the ramp. Proceed with the removal - 4450B04 right front wheel r r . Proceed with the removal - 7055B54 under-engine guard - r r . Proceed with the removal - 1016A40 ignition coil cover on cylinder head- r+r . 1. Undo the bolts (1a), nut (1b) and remove the engine components single drive belt protection (1c).

1. Remove the buttons (1a), undo the attachments (1b) and remove the front right wheelarch mudguard (1c).

1. Undo the nut (1a) and remove the brackets (1b) securing the power steering pipes.2. Use a spanner on the moving tensioner (2a) and remove the single drive belt (2b).

1. Undo bolts (1a) and remove protection (1b).2. Fit the flywheel lock.

	Name	Country
2	Counter-torque	1.860.898.000

1. Undo the bolts (1a) and remove the crankshaft pulley (1b).

1. Remove the cap (1a), undo the bolt (1b) and remove the single belt fixed tensioner (1c).

1. Undo the bolts (1a) and remove the upper protective timing cover (1b).

1. Undo the bolts (1a) and remove the right side protective timing cover (1b).2. Undo the bolts (2a) and remove the left side protective timing cover (2b).

1. Undo the bolts (1a) and remove the lower protective timing cover (1b).

Refitting ( Removing

) Fit the lower protective timing cover and secure using the bolts.Place the protective timing side covers back in their housings and secure them using the bolts.Fit the upper protective timing gear cover and fix it using the bolts.1. Place the engine components single drive belt fixed tensioner (1a) back in its housing and fix it tightening the bolt (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FIXED SINGLE SERVICE BELT TENSIONER	M8	2.2 ÷ 2.8

2. Place the engine components single drive belt fixed tensioner plug back in its seating.

Fit the flywheel lock.

	Name	Country
-	Counter-torque	1.860.898.000

1. Place the crankshaft pulley (1a) back in its seating and secure it tightening the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CRANKSHAFT PULLEY	M8	2.3 ÷ 2.8

Remove the flywheel lock.

	Name	Country
-	Counter-torque	1.860.898.000

Place the protection back in its housing and secure it using the bolt.Use a spanner in an anti-clockwise direction on the moving tensioner and fit the engine components single drive belt.Fit the brackets securing the power steering pipes in their seatings and secure them with their nuts.Refit the right front wheel compartment mudguard in its seating and secure it with its fastenings and buttons.Refit the engine components single drive belt protection in its seating and secure with its nut and bolts. Proceed with the refitting - 1016A40 ignition coil cover on cylinder head- r+r . Proceed with the refitting - 7055B54 under-engine guard - r r . Proceed with the refitting - 4450B04 right front wheel r r . Remove the car from the ramp.