1040A74 INERTIA SWITCH FOR ELECTRIC PUMP SUPPLY CIRCUIT R + R - Alfa - 156 - eLearn

3237519 - 1040A74 inertia switch for electric pump supply circuit r + r

) Ensure that the ignition key is in OFF position, then disconnect the negative battery terminal.

	Name	Connector
-	Battery	A1B

1. Undo the bolts (1a) and remove the plastic shield (1b) from the inertia switch under the driver's seat.2. Undo the bolts (2a) and extract the inertia switch (2b) from its housing.3. Disconnect the electrical connection and remove the inertia switch.

	Name	Connector
3	Inertia switch	I50

Refitting ( Removing

) Connect the electrical connection to the inertia switch.Place the inertia switch back in its housing and fix it using the bolts.Place the plastic shield for the inertia switch back in its housing and fasten it using the bolts.Connect the negative (-) battery terminal.