3237588 - 1080B93 right upper lambda sensor r r

Removing ( Refitting ) Ensure that the ignition key is in the OFF postition, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the right Lambda sensor and release it from the mounting bracket.

	Name	Connector
1	Lambda sensor on pre-catalyzer -2	K16

1. Undo and remove the right Lambda sensor. Refitting ( Removing ) 1. Place the right Lambda sensor back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	-	RIGHT LAMBDA SENSOR	M18	4.0 ÷ 5.0

Connect the electrical connection for the right Lambda sensor and secure it to the mounting bracketConnect the battery terminal (-).