1092A10 CRANKSHAFT SERVICES PULLEY - R.R. - Alfa - 156 - eLearn

3237641 - 1092A10 Crankshaft services PULLEY - R.R.

) Position the vehicle on the ramp. Proceed with removal - 4450B04 right front wheel r r . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 1016A40 ignition coil cover on cylinder head- r+r . 1. Remove the buttons (1a), undo the attachments (1b) and remove the front right wheelarch mudguard (1c).

1. Undo the bolts (1a), nut (1b) and remove the engine components single drive belt protection (1c).

1. Undo the nut (1a) and remove the brackets (1b) securing the power steering pipes.2. Use a spanner on the moving tensioner (2a) and remove the single drive belt (2b).

1. Undo bolts (1a) and remove protection (1b).2. Fit the flywheel lock.

	Name	Country
2	Counter-torque	1.860.898.000

1. Undo the bolts (1a) and remove the crankshaft pulley (1b).

Refitting ( Removing

) 1. Place the crankshaft pulley (1a) back in its seating and secure it tightening the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CRANKSHAFT PULLEY	M8	2.3 ÷ 2.8

Remove the flywheel lock.

	Name	Country
-	Counter-torque	1.860.898.000

Place the protection back in its housing and secure it using the bolt.Use a spanner in an anti-clockwise direction on the moving tensioner and fit the engine components single drive belt.Fit the brackets securing the power steering pipes in their seatings and secure them with their nuts.Refit the engine components single drive belt protection in its seating and secure with its nut and bolts.Place the right front wheel housing dust protection back in its housing and secure it using the fastenings and buttons. Proceed with refitting - 1016A40 ignition coil cover on cylinder head- r+r . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 4450B04 right front wheel r r . Connect the negative (-) battery terminal.Remove the car from the ramps.