3237707 - 1084B26 emgine oil intake duct - r r

 - 1092G10  single engine belt r r - 1092A10  Crankshaft services PULLEY - R.R. - 1092G20  engine component single belt fixed tensioner - one - r + r - 1032D12  timing system protective cover(s) - r + r  - 1032D12  timing system protective cover(s) - r + r - 1092G20  engine component single belt fixed tensioner - one - r + r - 1092A10  Crankshaft services PULLEY - R.R. - 1092G10  single engine belt r r Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

NameConnector
-Battery  A1B 
Drain the air conditioner coolant circuit  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling . Proceed with removal  - 4450B04  right front wheel r r . Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with removal  - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary . Proceed with removal  - 5040A26  compressor mount - r r . Proceed with removal  - 1016A40  ignition coil cover on cylinder head- r+r . Proceed with removal  - 1076A48  catalytic converter heat shield - r r . Proceed with removal  - 1080B62  catalytic converter - r + r . Proceed with removal  - 1020A20  crank case oil sump - r + r clean seals for sealant application . 1. Undo the bolt securing the engine oil intake to the main bearing cap.2. Undo the bolts (2a) and remove the engine oil inlet (2b) and its gasket.
Refitting ( Removing ) Place the engine oil inlet, complete with gasket, back in its housing and secure it using the bolts.Tighten the engine oil air intake bolt to the main bearing cap. Proceed with refitting  - 1020A20  crank case oil sump - r + r clean seals for sealant application . Proceed with refitting  - 1080B62  catalytic converter - r + r . Proceed with refitting  - 1076A48  catalytic converter heat shield - r r . Proceed with refitting  - 1016A40  ignition coil cover on cylinder head- r+r . Proceed with refitting  - 5040A26  compressor mount - r r . Proceed with refitting  - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary . Proceed with refitting  - 7055B54  under-engine guard - r r . Proceed with refitting  - 4450B04  right front wheel r r . Fill the air conditioner coolant circuit  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling . Connect the negative (-) battery terminal.Remove the car from the ramps.