3237727 - 1048A47 HOSE from rigid pipe to throttle casing - R.R.
Removing ( Refitting ) Proceed with removal - 1016A40 ignition coil cover on cylinder head- r+r . 1. Loosen the band and disconnect the oil vapour recirculation pipe from the cam cover.2. Loosen the band and disconnect the vacuum pipe from the air inlet hose to the throttle casing.3. Loosen the bands (3a) and remove the throttle casing air inlet hose (3b).
Refitting
(
Removing
)
Place the throttle casing air inlet hose
back in its housing.Connect the vacuum pipe to the throttle
casing air inlet hose and tighten the band.Connect the oil vapour recirculation pipe
to the tappet cover.
Proceed with refitting
- 1016A40 ignition coil cover on
cylinder head- r+r
.