3237753 - 1080E28 enablement solenoid for flow of fuel vapour to inlet - r+r

Removing ( Refitting ) Position the vehicle on the ramp.Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal.

NameConnector
-Battery  A1B 
Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with removal  - 1076B18  rigid section of exhaust pipe between catalytic converter and silencer - r + r . Proceed with removal  - 1016A40  ignition coil cover on cylinder head- r+r . Proceed with removal  - 5530B10  battery - r+r . Proceed with removal  - 1072D10  modular inlet manifold - r+r . 1. At the bench, undo the bolts fixing the fuel vapour enabling solenoid mounting bracket to the inlet.2. Loosen the bands.3. Remove the fuel vapour enabling solenoid to the inlet (3a) complete with pipe (3b).
Refitting ( Removing ) Place the fuel vapour enabling solenoid to the inlet, complete with pipe, back in its housing and tighten the bands.Tighten the bolts fixing the fuel vapour enabling solenoid to the inlet mounting bracket. Proceed with refitting  - 1072D10  modular inlet manifold - r+r . Proceed with refitting  - 5530B10  battery - r+r . Proceed with refitting  - 1016A40  ignition coil cover on cylinder head- r+r . Proceed with refitting  - 1076B18  rigid section of exhaust pipe between catalytic converter and silencer - r + r . Proceed with refitting  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminal.Remove the car from the ramps.