3237897 - 1820B20 (Pump) - MASTER CYLINDER R.R.
Removing
(
Refitting
)
- 5530B10 battery - r+r - 5530B52 Battery DRIP TRAY/SUPPORT - R.R.Use a special syringe to suck out the
clutch-brake fluid from the tank.Disconnect the intermediate joint in the
hose connecting master cylinder to vibration damper.1. Disconnect master cylinder push rod (1b) from the clutch pedal
after pulling out the splitter pin (1a).
Refitting
(
Removing
)
Install master cylinder complete with seal
ring and delivery hose; fasten to body with its locknuts.Connect the tank-master cylinder hose to
the master cylinder end.Locate the master cylinder pushrod on the
clutch pedal pin and stop it in position with the splitter pin.Connect the intermediate joint in the master
cylinder-vibration dumper hose, and tighten it ot the right torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | DELIVERY HOSE TO SLAVE CYLINDER | M12 | 1.7 - 1.9 |