4420C30 L/H OR R/H REAR SUSPENSION TIE ROD (ONE) - R+R - Alfa - 156 - eLearn

3238210 - 4420C30 l/h or r/h rear suspension tie rod (one) - r+r

) Position the vehicle on the ramp.Raise the vehicle. - 4450B11 WHEEL (one) rear - R.R.1. Undo the nut securing the rear suspension tie rod to the hub stub axle.2. Undo the bolts (2a) and remove the rear suspension tie rod (2b).

Refitting ( Removing

) Fit the rear suspension longitudinal tie rod and secure it to the bodyshell tightening the bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR ANCHORAGE ROD	M10	6.2 - 6.8

Tighten the bolt securing the rear suspension tie rod to the stub axle to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR ANCHORAGE ROD	M12	11.7 - 12.9

- 4450B11 WHEEL (one) rear - R.R.Lower the vehicle.Remove the car from the ramp. Check and, if necessary, adjust the wheel geometry - 4450A40 rear wheel geometry - check using optical equipment .