5505C40 CABIN WIRIRNG - R R - Alfa - 156 - eLearn

3238395 - 5505C40 cabin wirirng - r r

To precisely find electric connections, see "Wiring diagrams" Section.

) 1. Unloose pretension screws (1a) right and left side till you can extract rear door electric connections (1b) from their seats.

1. Unscrew cover screws on fuel reservoir.2. Remove cover.3. Disconnect electric connection.

1. Disconnect trunk compartment cover loom electric connection.2. Disconnect mass terminals.3. Disconnect remaining electric connections.4. Open stop clamps.5. Remove loom.

Refitting ( Removing

) Check harness is not damaged and each conductor is properly anchored to connections.Check connections have secondary lock devices. if necessary carry ouy proper continuity tests.Position rear loom again.Block it with stop clamps.Connect electric connections.Connect mass terminals.Connect trunk compartment cover loom electric connection.Connect fuel level/pump electric connection.Reassembly cover by fixing it with screws.Position rear door electric connections again and tighten pretensioning screws right and left side by fixing them to the prescribed couple.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT SEAT BELT PRETENSIONER.	-	3.6 - 4.4