3238773 - 7035A04 WINDSCREEN - Removing penetration

Removing ( Refitting ) Depending on the location of the penetration, remove the interior and/or exterior components covering the edge of the windscreen.1. Wet with soapy water the external area where the leak occurs.2. Blow compressed air from inside and identify the point of the leak. Refitting ( Removing ) If the leak is small, seal the relevant part from the inside and wait for the sealant to dry. Then repeat the test. If the penetration is more extensive, refer to Op.   7035A14  (Bonded type) windscreen GLASS - R.R. - Includes. cleaning edges of glass and housing in bodyshellRefit the parts removed previously.