3238940 - 7050B22 Rear seat armrest' COVER - R.R. with armrest removed

Removing ( Refitting )  - 7050B18  rear seat arm rest - r+r1. Unscrew the bolts.2. Remove the embellishment using the special tool. Use the tool in the area shown in the figure.

	Name	Country
2	Scraper blade	1.823.014.000

3. Remove the retainers.4. Prise off the edges of the cover on the perimeter exposed by the trim.5. Prise the cover (5a) off the padding (5b).6. Recover the unwoven cloth protection.7. If necessary, remove the cover (7a) and remove the trim (7b). Refitting ( Removing ) Check that the cover is intact and shows no signs of damage.If removed, refit the trim and fit the cover.Position the unwoven cloth protection on the padding.Fit the padding cover and mould in place.Fit the edges of the cover on the perimeter of the embellishment seating.Fit the retainers.Fit the embellishment.Tighten the screws. - 7050B18  rear seat arm rest - r+r