3237477 - 1020D40 flywheel end oil seal- r+r with flywheel removed

Removing ( Refitting ) 1. Undo the bolts (1a) and (1b), then remove the flywheel side oil seal cover (1c) with the built in oil seal.
Cut the sealant between the oil sump and the flywheel side oil seal cover.
Refitting ( Removing ) Apply silicon sealant to the matching surfaces between the oil sump and the flywheel side oil seal cover.1. Place the flywheel side oil cover with the built-in oil seal (1a) back in its housing using the tool (1b).

NameCountry
1bFitting tool1.820.619.000
2. Tighten the bolts (2a) and (2b) securing the flywheel side oil seal cover to the recommended torque.

FasteningComponentØValue(daNm)
2aBoltCRANKSHAFT REAR COVERM6(Engine crankcase side) 0.8 ÷ 1.0

FasteningComponentØValue(daNm)
2bFront and rear boltOIL SUMPM6(Flywheel oil seal cover side) 0.8 ÷ 1.0