3237678 - 1048A23 cold air intake - r r
Removing
(
Refitting
)
Position the vehicle on the ramp.
Proceed with the removal
- 7055B54 under-engine guard -
r r
.
Proceed with the removal
- 4450B10 Front WHEEL (one) -
R.R.
(Left side).
Proceed with the removal
- 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R.
(Left
side).
Proceed with the removal
- 7055B42 Additional FRONT WHEEL
ARCH (one), left or right - R.R.
(Left
side).
1. Undo the bolts (1a) and remove the fog light trim (1b) after
having released it from the fastening spring.
Refitting
(
Removing
)
Place the cold air intake for the air filter
back in its housing.Tighten the bolt fixing the air filter
cold air intake to the resonator.Place the fog light trim back in its housing
and secure it using the bolts.
Proceed with the refitting
- 7055B42 Additional FRONT WHEEL
ARCH (one), left or right - R.R.
(Left
side).
Proceed with the refitting
- 7055B64 Engine compartment DUST
shield in front wheel arch (one), left or right - R.R.
(Left
side).
Proceed with the refitting
- 4450B10 Front WHEEL (one) -
R.R.
(Left side).
Proceed with the refitting
- 7055B54 under-engine guard -
r r
.
Remove the car from the ramp.
Removing
(
Refitting
)
Position the vehicle on the ramp.
Proceed with removal
- 7055B54 under-engine guard -
r r
.
1. Undo the bolt fixing the air filter cold air intake to the bodyshell.2. Release the retaining springs fastening the cold air intake to
the air filter casing.3. Remove the air filter cold air intake.
Refitting
(
Removing
)
Place the cold air intake for the air filter
back in its housing and connect it to the air filter until the retaining
springs are attached.Tighten the bolt securing the cold air
intake for air filter to the bodywork.
Proceed with refitting
- 7055B54 under-engine guard -
r r
.
Remove the car from the ramps.