1056B17 THROTTLE BODY INTERGRAL WITH DVL - R R - Alfa - 156 - eLearn

3237535 - 1056B17 throttle body intergral with dvl - r r

) Ensure that the ignition key is in stop position, then disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1B

1. Disconnect the oil vapour recirculation pipe from the right cylinder head.2. Disconnect the corrugated hose from the throttle body and move aside.

1. Disconnect the electrical connection from the throttle casing integrated with the D.V.L.

	Name	Connector
1	Throttle body actuator	N75

2. Undo the bolts (2a) and remove the throttle body integrated with the D.V.L. (2b).Remove the gasket.

Refitting ( Removing

)

When refitting, it is essential to repeat the learning procedure for the throttle body integrated with D.V.L. ( - 1056B81 run electronic ignition/injection control unit (single) self-learning procedure .

Fit the throttle body integrated with the D.V.L. complete with gasket and fix it with the relevant bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	BUTTERFLY VALVE CASE/S (MPI)	M6	Air chamber side 0.8 - 1.1

Connect the electrical connection to the throttle body integrated with the D.V.L.Place the complete corrugated hose back in its housing and connect it to the throttle body with integrated D.V.L.Connect the vapour recirculation pipe to the right cylinder head.Connect the battery terminal (-).