4130B58 HEAT EXCHANGER OR COIL - R.R. - Alfa - 156 - eLearn

3238145 - 4130B58 HEAT EXCHANGER or COIL - R.R.

) Position the vehicle on the ramp.Drain the power steering fluid from the reservoir using a suitable syringe. - 7055B54 under-engine guard - r r . 1. Slacken bands (1a) and disconnect the flexible hoses (1b) from the heat exchanger coil.2. Undo nuts (2a) and remove the heat exchanger coil (2b).

Refitting ( Removing

) Place the heat exchanger coil back in its housing and secure it using the nuts.Connect the flexible hoses to the heat exchanger coil and secure them using the bands. - 7055B54 under-engine guard - r r . Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	POWER ASSISTED STEERING CIRCUIT	TUTELA GI/A	-

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times.Check and, if necessary, top up the fluid level in the reservoir.Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left).Top up the fluid level in the reservoir.