3233090 - K52 CODE FAILURE WARNING LIGHT ON
During starting, the CODE warning light.comes on and remains on for more than 0.7 seconds. (after carrying out the initial control unit test, the warning light should go out, ...)| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check the operation of the i.e. failure warning light | Continue to Step 1 | The i.e. failure warning light also comes on and remains on | See table K56 | |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect
the diagnostic equipment (Examiner or other instruments) to the
diagnostic socket Check:
| Continue to Step 2 | An error is detected in the control unit | Continue according to the instructions for the diagnostic equipment | |
| Lack of dialogue with the control unit | Restore the connection between the CODE control unit and the diagnostic connector ( See E7010 CODE ). | |||
| 2 | CHECK CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |