3237501 - 1036E11 camshafts in left hand cylinder head - r r on vehicle for versions with air conditioner
Removing
(
Refitting
)
- 4450B10 Front WHEEL (one) - R.R. - 7055B64 Engine compartment DUST shield in front wheel arch
(one), left or right - R.R. - 1016A42 left hand cylinder head ignition coil cover - r+r - 5510C16 left hand cylinder head ignition coil - r+r - 1016A30 left cam cover - r + r and replace gasket - 1092G10 single engine belt r r - 1092A10 Crankshaft services PULLEY - R.R. - 1032D12 timing system protective cover(s) - r + r - 1032B14 toothed timing belt - r + r for timing adjustment
or replacement versions with air conditioner - 1032C32 fixed timing system tensioner (one) r + r - 1032B55 lh head toothed drive pulley - r r for versions with
air conditioner1. Undo the bolts (1a) and remove the timing belt rear left protection
(1b).2. Undo the bolts (2a) and remove the camshaft caps from the left
cylinder head (2b).3. Remove the camshafts from the left cylinder head complete with
oil seals.
Refitting
(
Removing
)
Fit the camshafts to the left cylinder
head complete with new oil seals.Fit the camshaft caps and fix them tightening
the bolts to the recommended torque. | Check that the camshaft oil seals are positioned correctly in their seatings. |
 | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | CAMSHAFT CAPS | M8 | 1.8 - 2.0 |