1080B60 LAMBDA SENSOR - R.R. - Alfa - 156 - eLearn

3237584 - 1080B60 LAMBDA SENSOR - R.R.

) Position the vehicle on the ramp.Disconnect the battery negative (-) terminal.

	Name	Connector
-	Battery	A1

1. Disconnect the electrical connection from lambda probe (1a) and release the wiring from fastening (1b).

	Name	Connector
1a	Lambda sensor	K40

Raise the vehicle.1. Release the lamba probe electrical wiring from its fastening.2. Undo and remove the Lambda sensor complete with electrical wiring.

Refitting ( Removing

) Lower the vehicle.Place the Lambda sensor, complete with electrical wiring, back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	LAMBDA PROBE	M18	4.0 ÷ 5.0

Raise the vehicle.Fit the lambda probe to the exhaust manifold and secure the wiring to the collar.Lower the vehicle.Connect the electrical connection for the Lambda sensor and fix the electrical wiring to the collars.Connect the battery terminal (-).Remove the car from the ramp.