3238079 - 3330D24 vacuum pipe for brake servo - r+r
Removing ( Refitting ) Proceed with the removal - 5530B10 battery - r+r . Proceed with the removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . 1. Disconnect the brake servo vacuum pipe from the brake servo single-acting valve.
1. Loosen the band and disconnect the brake servo vacuum pipe from
the intake manifold.
1. Release the brake servo vacuum pipe from the fastenings and remove
it.
Refitting
(
Removing
)
Place the vacuum pipe for the brake servo
back in its housing and connect it.
Proceed with the refitting
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
Proceed with the refitting
- 5530B10 battery - r+r
.
Removing
(
Refitting
)
Proceed with the removal
- 1048A34 sleeve(s) from flow
meter to air supply capacity case - r + r
.
Proceed with the removal
- 5530B10 battery - r+r
.
Proceed with the removal
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
1. Disconnect the vacuum pipe for the brake servo from the air chamber.2. Release the vacuum pipe for the brake servo from the retaining
band.3. Disconnect the brake servo vacuum pipe from the single-acting
valve and remove.
Refitting
(
Removing
)
Place the vacuum pipe for the brake servo
back in its housing and connect it to the single-acting valve.Secure the vacuum pipe for the brake servo
to the securing band.Connect the vacuum pipe for the brake servo
to the air chamber.
Proceed with the refitting
- 5530B52 Battery DRIP TRAY/SUPPORT
- R.R.
.
Proceed with the refitting
- 5530B10 battery - r+r
.
Proceed with the refitting
- 1048A34 sleeve(s) from flow
meter to air supply capacity case - r + r
.