3238100 - 3340b52 pump/central obs pipe - r r

Removing ( Refitting )  - 5530B10  battery - r+r - 5530B52  Battery DRIP TRAY/SUPPORT - R.R.1. Drain the brake fluid from the reservoir using a suitable syringe.2. Disconnect the air inlet hose from the inlet manifold. 1. Undo the bolts (1a) and move the brake-clutch fluid reservoir (1b).2. Remove the engine bulkhead seal.3. Move the relay holder brackets. 1. Undo the connectors and remove the rigid pipe from the master cylinder to the hydraulic control unit. Refitting ( Removing ) Fit the rigid pipe from the master cylinder to the hydraulic control unit and fasten the connectors to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	BRAKE SYSTEM FITTINGS	M10	1.3 - 1.5

Place the relay holder brackets back in their housings.Place the engine bulkhead seal back in its seating.Place the brake-clutch fluid reservoir back in its housing and secure it using the bolts.Connect the air inlet hose to the intake manifold. - 3330A14  HYDRAULIC BRAKING SYSTEM - Bleed air - 5530B52  Battery DRIP TRAY/SUPPORT - R.R. - 5530B10  battery - r+r