3238433 - 5030B26 lead between battery and starter motor - r+r

To precisely find electric connections see "Wiring Diagram".

Removing ( Refitting ) Place the car on the lifting bridge.  - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r 1. By acting by engine compartment side, disconnect battery positive terminal.2. Disconnect auxiliary connections from terminal.3. Disconnect electric connection with engine compartment harness.4. Disconnect electric connection from backing light switch.5. By acting under the car, disconnect starter motor electric connections.6. Disconnect alternator electric connections.7. Disconnect engine oil pressure sensor electric connection.Free cable from what is still blocking it.8. Remove cable. Refitting ( Removing ) Check harness is not damaged and each conductor is properly anchored to connections.Check connections have secondary locks.If necessary, carry out right continuity tests.Place cable again from battery positive to starter motor - alternator.Lift the car and connect connections of oil pressure sensor, alternator and starter motor.Lower the car and connect cable electric connections.Connect battery terminal.  - 1076B52  exhaust pipe (one) leaving l/h or r/h exhaust manifold - r + r