3238973 - 7065A80 pre-tensioner wiring - r r

Before removing and refitting the pretensioner wiring harness the following preliminary operations must be carried out:

  • Place the ignition key in the OFF position and extract it;
  • Disconnect the battery leads and insulate.
  • Wait for 10 minutes before continuing.
FOLLOW ALL THE RECOMMENDED SAFETY RULES (  See assembly 7065A   FRONT SEAT BELTS - PRECAUTIONS).
Removing ( Refitting )  - 1056B82  injection/ignition system e.c.u. (one) - r + r - 7040G24  switch for facia compartment light - r+r - 7040G20  facia compartment light bulb holder - r+r - 7040A31  flap assembly - r r - 7040A14  flap of glove compartment trim element (one) - arrangeRemove the control unit bracket. - 7040L44 rear compartment scuff strip - r r (right and left)  - 7040H36  central trim lower element - r r (right and left).  - 7040L40  front compartment scuff strip - r r (right and left).  - 7045A10  l/h or r/h front seat (one) - r+r (right and left).  - 7050A20  one-piece rear seat cushion - r r - 7040A65  passenger compartment box lock , one , r r (right and left).  - 5040D22  control (one) of air conditioner control support - arrange - 7065C42  ashtray (one) r+r - 5570T80  car radio unit - r+r - 2125C24  gear lever knob - r + r - 7040A60  under facia trim - r+r - 3380A44  handbrake/linkage protection - r+r - 7040L28  tunnel switch panel - r r - 7040L20  tunnel trim - r r - 5010B46  central air duct to rear seat - arrange - 5010C44  air diffuser to rear seat - r+r - 7040L10  cabin floor carpet - r r1. Disconnect pretensioner electrical connections (1a, 1b).

NameConnector
1aDriver's seat belt pre-tensioner  Q20 

NameConnector
1bFront passenger seat belt pre-tensioner  Q21 
2. Disconnect air bag wiring electrical connections (2a (2b).

NameConnector
2aPretensioner connection  D61A 

NameConnector
2bPretensioner connection  D61B 
3. Disconnect the wiring harness retaining collars.4. Remove the wiring harness.
Refitting ( Removing ) Check that the wiring is undamaged and that the individual conductors are firmly attached to the connections.Check that the connections are fitted with anti-slip devices (secondary lock).If necessary, check the continuity. Fit the wiring harness, secure using retaining collars and connect the electrical connections. - 7040L10  cabin floor carpet - r r - 5010C44  air diffuser to rear seat - r+r (right and left).  - 5010B46  central air duct to rear seat - arrange - 7040L20  tunnel trim - r r - 7040L28  tunnel switch panel - r r - 3380A44  handbrake/linkage protection - r+r - 7040A60  under facia trim - r+r - 2125C24  gear lever knob - r + r - 5570T80  car radio unit - r+r - 7065C42  ashtray (one) r+r - 5040D22  control (one) of air conditioner control support - arrange - 7040A65  passenger compartment box lock , one , r r (right and left).  - 7050A20  one-piece rear seat cushion - r r - 7045A10  l/h or r/h front seat (one) - r+r (right and left).  - 7040L40  front compartment scuff strip - r r (right and left).  - 7040H36  central trim lower element - r r (right and left). - 7040L44 rear compartment scuff strip - r r (right and left). Refit the bracket and secure using a threaded plug and nut. - 7040A14  flap of glove compartment trim element (one) - arrange - 7040A31  flap assembly - r r - 7040G20  facia compartment light bulb holder - r+r - 7040G24  switch for facia compartment light - r+r - 1056B82  injection/ignition system e.c.u. (one) - r + r Check component operation after refitting.Check the operation of the system using the Examiner or another tester.